Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

MicrmoMarmo

$24.95
SKU: micromarmo
Weight:
2.00 LBS
Shipping:
Calculated at checkout
Qty

    MicrmoMarmo

    micromarmo-for-floor-1.jpg

     It is the dimensional evolution of ARTHE's top class decoration, with MICROMARMO floor it is possible to obtain extraordinary and exclusive floors of very low thickness, with aesthetic effects of absolute
    uniqueness, with great resistance performances, applicable on new floors as well as on old pre-existing floors.
    MICROMARMO floor is intended for indoor floors in prestigious environments, both public and private, with the peculiarity of the total absence of joints.
    MICROMARMO floor is not, and does not want to be, a resin floor, it is a mineral finish with natural and inert stone components, characterized by a surprising
    comfort, not possible achieved with the "cold" and synthetic epoxy flooring.
    MICROMARMO floor allows you to obtain continuous high-walled wall-to-wall solutions, all of which meet the contemporary furnishing requirements of contemporary architecture.
    MICROMARMO floor stands out as an alternative to traditional tiles for bathroom lining, indoor showers, local sauna, kitchens, and flooring etc ...
    The
    MICROMARMO floor application cycle has the great advantage of being composed of a single, singlecomponent powder product, to be simply mixed with
    water, used both as a smoothing agent and as a finishing, with excellent filling power, with a proper primer and final clear protection.
    Excellent results also include compression, flexion and wear degradation resistances.

    Method of Application

     

    ON TILES

     

    Clean and degrease thoroughly, carefully check for good adhesion and cohesion, and follow the steps below:

     

    1. 1.      Apply with a roller or brush one coat of

     

    MICROMARMO PRIMER

     

    1. 2.  granule evenly, allow to dry for at least 24 hours

     

    Paste: Add 18 kg of MICROMARMO slowly to 5.4 Lt of water, taking care to keep stirring and mixture while adding MICROMARMO, mix thoroughly for at least 5 minutes, avoiding lumps, allow the mixture to rest for about 10 minutes. Any coloring must be done in the water mixing stage prior to the addition of MICROMARMO. For very strong colors where the colorant may exceed 250 ml. it is necessary to reduce the amount of water in the paste to the same volume of the colorant.

      

    1. 3.  ON ASSORBENT CEMENTING SURFACE

     

     Check the actual compactness, completely aspirate, and consolidate with DERASOL H2O diluted with water at a ratio 1: 1. Continue the application as on tiles.

     Avoid applying the product with relative air humidity over 80%); Do not apply on damp substrates or where the presence of rising or infiltrating humidity has been found..  

     

    Technical Data

     

    SPECIFIC WEIGHT APPARENTLY: 1,010 Kg./Lt. ±0,5%

    ASPECT: White powder

    TINTING: 150 colors can also be achieved from our color chart for external with the tinting system: Global Tinting System.

    PRODUCT CYCLE YIELD

    MICROMARMO PRIMER: 0,15-0,20 Lt./m² MICROMARMO: 3-4Kg./m² two coats according to the desired finish on a well-levelled surface. , 

    MATT PROTECTOR 2K: 0,18-0,200 Lt./m²

    WATER FOR MIXING: about 30%(in 18 kg. of MICROMARMO. 5,4 Lt water should be reduced when using colorant

    APPLICATION TEMPERATURE: Between i 5°C and  30°C

    APPLICTION: Stainless steel trowel

    POOT LIFE: 1 hour at  20°C (ready mixed paste)

    PRESSING TIME: 2 hours at  20°C

    TIME BEEFORE WALKING ’: Min 24 hours at 20°C 

     

     MicroMarmo Technical Data Sheet

     

    micro-inglese.jpg

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    Sign up for our newsletter

    View Cart Go To Checkout