Vieroplast | Wood effect

$79.95

SKU: Vieroplast Wood

Weight:

1.00 LBS

Shipping:

Calculated at checkout

VIEROPLAST | WOOD EFFECT

Wood is the striped decorative effect that is inspired by the warm and natural appearance of the bark of trees. The application with VIEROPLAST plaster proposes a vertical lining and a delicately aged effect given by the application of a grout with DECORATIVE BITUME. It comes with a color collection dedicated to the theme. References in the folder: Teak (PLA14), Iroko (PLA24) and Wengè (PLA26)

VIEROPLAST is the ideal matrix available to the decorator to create personalised decorative effects: textured, trowelled,
ribbed. Easy to shape, based on the tools used it can give life to distinctive aesthetic solutions evocative of different
materials. This colour collection is designed to recall the ambiences typical of the use of stone, wood and the warmth
of striped & ribbed fabrics. STONE, WOOD and CORDUROY are just some of the application examples of the innumerable
textures that can be made with VIEROPLAST, which can be used alone or together with other decorative finishes of the
Viero line.

Method of application

Base Coat

• after the wall preparation, apply a priming undercoat of VIEROQUARTZ thinned 1:1 in water in the same colour of STONE. The use of VIEROQUARTZ as a base coat gives an initial coloured covering and protection and facilitates the application of the coating.

Steel trowel + foam roller + steel spatula

When VIEROQUARTZ is completely dry, apply a uniform layer of STONE with a small stainless steel trowel all over the surface as base coat
Once the first coat is dry, apply with the same tool a consistent layer about 3mm thick of STONE to the wall
While the material is still wet, roll over the surface vertically and horizontally with a foam roller. Stipple the product

inside the corners and along the edges to achieve an even and consistent coat thickness. Give the last roll always

vertically in the same direction to achieve a regular stipple
As soon as the plaster is no longer tacky to the touch work across vertically the surface with a blade of stainless steel

trowel in a quick sweeping action to smooth the surface
When the surface is completely dry (12-24 hours) burnish the wall with a soft stainless steel spatula

Wax application

STONE can be finished with the application of NATURWAX. The wax penetrates into the plasters pores and seals protect them from unwanted moisture adding protection and enhancing colour and shine.

Apply wax using a clean blade or a dry, clean white cotton cloth, wiping away excess of wax. If the wax is left unworked

on the surface, or is squeezed into the surface with a trowel, the deep penetration can cause dark stains, which cannot

be removed
Wait the first coat of wax until dry and buff it with a dry, clean cotton cloth.

For best result a 2 coats application is necessary.

Practical Advices
For application of STONE we advise a minimum of two people.
One person should apply the product on the wall in areas from top to bottom spreading the product on the wall without interruptions to keep the edges of the areas of product applied always wet. Applying wet material to wet material will result in a beautiful even texture.
A second person should roll the product on the wall following the applicator and smooth the surface when no longer tacky.

Consuption Rate: 1,7-2,0 Kg/m2

VIEROPLAST CATALOG CLICK HERE FOR VIEW

VIEROPLAST TECH SHEET CLICK HERE FOR VIEW

Stone Catalog in PDF

Stone Tech Sheet

Stone Safety Sheet