MARMORINO HYDRO

Visolcalce Marmorin Hydro 

Water-repellent, smooth, translucent lime based marmorino plaster with a transparent finishing coat for total waterproof protection of lime-based surfaces and stone materials.

Expressly created for bathrooms or for those rooms where water is present. HYDRO is a translucent slaked lime based Marmorino plaster formulated with special additives that make the surface highly water-repellent. The waterproof and washable texture gives life to smooth surfaces moved by the materic strokes of its application. Hydro Protection is a waterproof finishing coat that has a calm saturated look that is neither glossy nor matt.

Slaked, translucent lime based Marmorino plaster, formulated with special additives that make the surface highly water-repellent

Hydro Protection

Water based long lasting, surface-finishing, transparent, water/oil repellent and stainless treatment. Ideal for the protection of lime based surfaces (coatings, finishes, plasters), stone and other surfaces (floors, tiles, etc..)
The product is particularly suited for use in very damp areas such as showers, saunas, etc. It effectively protects lime-based surfaces and finishes from damage caused by humidity and strong showers. The special formula allows excellent penetration of the product on the surfaces to be treated, with no impact to their breathability and colour or appearance.

• It provides excellent water/oil repellency and has a pearl effect.

• Excellent stain resistant properties;

• High resistance to UV rays and weathering;

• Treated surfaces are easily cleaned;

• Does not change the natural appearance of the treated surface;

• Does not yellow over time.

Method of application:

Visolcalce Marmorin Hydro  

Apply two coats of MARMORIN HYDRO 24 hours apart using a stainless steel trowel and refinish with a circular movement using a sponge trowel, as for a normal plaster.

For a smooth and translucent finish, the second coat should be polished and compacted with a stainless steel trowel.

The final shade will be highlighted with “light and shade” effect. If used in very damp areas such as baths, showers, etc. where greater water repellency is needed, apply a top coat of HYDRO PROTECTION 

Hydro Protection 

Apply the product only on clean, absorbent surfaces (plasters or lime-based paints) or stone materials that have been properly cleaned with a pressure washer or chemically treated. Make sure the product is spread uniformly, applying at least 2 coats, waiting 24 hours between them.

For highly porous surfaces, we recommend applying HYDRO PROTECTION until complete saturation is obtained.

The product reaches its full water-repellency 7 days after application

Consuption Rate: Visolcalce Marmorin Hydro - 3,0 - 3,5 kg/m2

                                Hydro Protection - 12,20 m2/l

Visolcalce Marmorin Hydro - Interiors

Hydro Protection - Interiors and Exterior

Visolcalce Marmorin Hydro Catalog

Visolcalce Marmorin Catalog

Visolcalce Marmorin Hydro Tech Sheet

Visolcalce Marmorin Hydro Safety Sheet

Save

Save

Save