Wax Cera Naturale -Natural Wax

Natural bees wax specially formulated for lime plaster. Water base and naturally 100% 

0 % VOC free.

Cera Naturale is used to increase the shine and durability of lime and decorative plasters on interior wall surfaces only.

Application: Allow plaster to dry for up to 48 hours before applying wax.  Mix wax carefully and spread with a soft cloth or non-abrasive sponge.  Wait one to two hours and proceed to burnish with a cloth or mechanical buffer. Storage: Cera Naturale maintains its properties for a period of 12 months if protected from excessive heat and cold. The storage temperature must be between 41 and 86 degrees F. Protect from frost.

Wax Cera Naturale (Natural Wax) is a special water-based dirt protective, for all  lime-based mineral finishing:

Wax Cera Naturale is composed by genuine bees wax, pure savon de Marseille and additives in an homogeneous blend. It’s completely solvent free (0% VOC).

Wax Cera Naturale increases the glossiness and confers to the surface washable properties, maintaining an outstanding breathe through capacity.

Wax Cera Naturale is suitable for indoor wall surfaces protection only.

Application: Ready to use, mix carefully before using.  Let the surface to dry out for at least 48 hours. Spread a coat of wax with a soft (non-abrasive) sponge for about 11sq ft, and continue the application until the wall doesn’t absorb anymore. Remove with paper cloth the excess of wax from the surface.

After about 30 minutes and before 2 hours, proceed to burnish with a non-woven fabric cloth (micro fibre or TNT/tissue-non-tissue cloth) or mechanic polisher.

 Safety guidelines: Avoid contact with skin and eyes. If contact occurs, rinse thoroughly with water. For more information consult the safety sheet or a physician.

 Available in: 1 Quart, 1 Gallon, 2 Gallon pails. 

 Spread rate:  200-300 Sq. ft. per quart.

Wax Cera Naturale Tech Sheet in PDF

Wax Cera Naturale Safety Sheet in PDF