Floccules is the decorative effect that is obtained by the presence of floccules or soft aggregates that can be worked inside decorative finishes. The application with the MYCENE paint proposed here, is characterized by a metallic base with gold or silver accents and by the presence of flocs of black color that give a delicate movement to the thickness of the surface.
This is a luminous and desirable effect achieved due to the presence of “floc”, or small soft
flakes that can be worked within finishes. The MYCENE application is
characterized by a metal base with gold or silver accents. The small
flocs with black dots endow it with a delicate dynamism.
MYCENE
Pearlescent finish enhanced with black flakes
MYCENE is a decorative finish for interiors containing flakes that endow surfaces with gentle movement
and pearlescent reflections. The special finish is achieved by means of a mineral component that always
reveals different aspects, thereby ensuring a totally unique finish.
VOC Classification(Volatile organiccompounds)Directive 2004/42/ECDecorative effect coatings
EU VOC limit value for MYCENE (cat. A/l): 200 g/L (2010).
MYCENE contains no more than 100g/L ofVOC
Produced in MADE IN ITALY
Main application tools Brush, spatula
Achievable effects Application method
Practical tips
The base coat should be set, clean and free from any chipping, peeling and/or dampness. New plasters should be left to age for at least 4-5 weeks to allow for complete carbonation.
Environmental conditions -> temperature: min. + 5 °C/max. + 35 °C, relative humidity: < 75%. Primer conditions -> temperature: min. + 5 °C/max. + 35 °C, humidity: < 10 with respect to relative
humidity. Shake the product before use or, if it is very dense, use a spatula or a mixing drill to achieve a workable consistency.
It is recommended that the colour of the completely dried product be checked before application.
Do not apply the product on surfaces exposed to direct sunlight or in the presence of strong drafts.
Do not rework on the same surface.
Do not interrupt application in the middle of a wall.
The product may not be stored for more than 48 hours after dilution.
Rinse used tools with water immediately after use.
Keep the paint can sealed and away from freezing temperatures and sunlig
Interior
Brushed, Pearly
MYCENE TECH SHEET CLICK HERE FOR VIEW