Borders and Stencils
Our hand picked collection of borders and stencils are the perfect addition to any faux painted or textured area. Even suitable for Venetian plasters, Atova's border and stencil collection add the perfect touch to any surface.
Free Borders "Free Border" are an alternative to positive stenciling. Adding a thorough and consistent texture to your designs can prove to be quite impressive.
View Gallery Borders and Stencils
The collection Free Borders, varnishable self adhesive borders, has been created for docoration of environment playing with the colours shade by shade with create a plain and elegant effect.
The easy laying and their delicate relief, make certainly a needfull element for the personalization of your walls.
TECHNICAL DESCRIPTION Support: N.W.C. (Non Woven Cloth) of cellulose and polyester. Weight: 125 g/sq. m. approximately. Composition Acrylic adhesive and natural spherical quartz; Sphere diameter 0.06/0.25 mm. Self Adhesive layer composition: Acrylic resin Weight Weight approximately 40 g/sq. m. and backing paper. Totel Weight: 400 g. to 600 g./sq. m. according to the graphic resolution.
Click here to see internet catalogue(2.4Mb)
To see web catalogit is necessary discharge a free plugin pressing here
APPLICATION ADVICES The varnishable borders "Free Borders" can be applied to any smooth and almost non-absorbent surfaces, such as: plaster walls, wood, plaster board painted walls, glass, plastic, etc. The surfaces must be: clean, dry and smooth. The borders can be removed and repositioned on almost every type of surface, for the first few minutes after their first positioning. However, it is advisable to carry out a test before starting work, to establish the characteristics of the surface to which the material is being applied. Remove the backing paper from the first foot of border and apply it, in the required position, using a light pressure, continue by taking off the next foot of backing paper, and so on to the end of the piece. In order to obtain a good result, the "Free Borders" must be applied before the last undercoat and varnish it over using a diluted acrylic varnish