Loading... Please wait...
  • This classic decoration features
small fragments of Italian marble
and is available in two different
grain sizes, one fine and one
medium. Being natural, the
particles that make up GRANIPLAST
have delicate colour variations
dictated by the marble veins from
which they come. The result is an
elegant and never standardized
finish.
  • Image 2

Graniplast | Grained effect

$79.95
SKU: GRANIPLAST
Weight:
1.00 LBS
Shipping:
Calculated at checkout
Qty

     Graniplast | Grained effect

    Continuous wall coating based on natural marble chips

    This classic decoration features small fragments of Italian marble and is available in two different
    grain sizes, one fine and one medium. Being natural, the particles that make up GRANIPLAST
    have delicate colour variations dictated by the marble veins from which they come. The result is an
    elegant and never standardized finish.

     

    GRANIPLAST 20


    Description
    Continuous wall coating with natural marble fine grains
    Main characteristics GRANIPLAST 20 is a continuous wall coating for external and internal surfaces based on acrylic
    polymers in water emulsion and washed and selected marble grains. The specific binder confers to the
    product resistance to alkali and atmospheric agents, good application properties and excellent adhesion;
    the use of natural marble grains ensures the typical stability of stone materials. Suitable for use on
    cement rendering, lime cement mortars or equivalent, Gypsum plaster, prefabricated elements etc.
    Tintometric system -
    Classification(UNI 8682)Natural grain – G3 – smoothed – R3 – S3 VOC Classification
    (Directive 2004/42/EC)
    Multi-colour paints.
    EU limit value for GRANIPLAST 20 (cat. A/k): 150 g/L (2007); 100 g/L (2010). GRANIPLAST 20 contains max 100 g/L of VOC.


    Surface treatment of the substrate
    On cement rendering and/or lime cement mortar:
    a) One coat of PRYMER ACQ thinned 1:5 with water or VIEROQUARTZ thinned 1:1 with water in a
    similar colour of the product to be used.
    On Gypsum plaster and other smooth surfaces:
    b) One coat of PRYMER SE and one coat of VIEROQUARTZ thinned 1:1 with water in a similar colour
    of the product to be used.
    On chalking, absorbent and degraded surfaces:
    a) Carefully remove all loose and flaking paints and other foreign substances, then restore the surface
    b) One coat of PRYMER SE and one coat of VIEROQUARTZ thinned 1:1 with water in a similar colour
    of the product to be used.
    Note: the application of VIEROQUARTZ in the same color, in addition to giving an initial covering,
    facilitates the application by improving the adhesion of the GRANIPLAST 20 on the surface. In all cases,
    the substrate must be dry, free from all traces of oils, clean and mature, in order to support the load of
    the finished product. Whenever there are any doubts about the grade of the consistency of the
    substrate, it is advisable to use PRYMER SE.
    Application cycle Mix the product until it becomes a soft and foamy mixture of whitish appearance.
    Apply with a steel trowel an uniform layer of GRANIPLAST 20 in a thickness equal to the size of the
    grains contained in the product.
    To level the layer work in cross movements with the trowel on edge.
    When the product starts to dry and loses its whitish appearance, give the last smoothing with the same
    steel trowel, taking care to maintain the tool always clean.

     

    GRANIPLAST TECH SHEET      CLICK HERE TO VIEW

     

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    Sign up for our newsletter

    View Cart Go To Checkout